Motorcycle
Record make, year, exact model, trim and ABS status.
WHY THE DETAILS MATTER
THE SAME MODEL CAN NEED A DIFFERENT LINE OR CABLE.
Handlebars, risers, levers, throttle parts, ABS and custom routing can all change length, movement and connection requirements. Send the complete setup—not only the model name.
BEFORE YOU ASK FOR A QUOTE
CHECK THE BIKE, CONTROLS, ROUTE AND ENDS.
Use these four checks for a replacement line, a control cable or a complete kit.
Controls
Note handlebars, risers, levers, master cylinder and throttle changes.
Route
Follow the intended path and check movement, heat and abrasion clearance.
Connections
Confirm fitting type, orientation, mounting points and included hardware.
WHAT TO SEND
PUT THESE DETAILS IN ONE MESSAGE.
Bike identityMake, year, exact model and trim
Control positionHandlebar and riser dimensions or part references
System configurationABS, master cylinder, caliper and control changes
Current routeFull-bike, cockpit and connection-point photos
Requested resultProduct family or reference, finish, quantity and destination
PRODUCT-SPECIFIC MEASUREMENTS
A CONTROL CABLE AND A BRAKE LINE NEED DIFFERENT INPUTS.
Use the existing part, a checked drawing or measurements taken by a qualified installer whenever possible.
MEASURE THE HOUSING, TRAVEL AND ENDS.
- Cable type: clutch, throttle, idle or other control
- Housing length and exposed inner-wire length
- End fittings, elbow angle and thread size
- Stock or aftermarket lever, throttle or carburetor
- Full-lock routing, free movement and required finish
CONFIRM THE SYSTEM, ROUTE AND CONNECTIONS.
- ABS or non-ABS system and single/dual-disc configuration
- Master-cylinder, junction, caliper and controller connection points
- Installed route, length and movement at full steering lock
- Banjo or fitting angle, thread, sealing and mounting details
- Destination market and any required product documents
Do not select or install a safety-critical line from appearance alone. Confirm compatibility and use a qualified installer when the application or routing is uncertain.
NEED HELP CHOOSING?
SEND FITMENT DETAILS →
SEND THE BIKE, CHANGES AND PHOTOS.
We will use the information to identify the next product or measurement question.